PAR PLAST - LW
Integral Liquid Waterproofing Compound for Plaster & Concrete

PAR Plast - LW is an integral liquid waterproofing admixture for concrete and cement mortar. It has good plasticising properties, makes concrete cohesive and prevents segregation. The liquid is to be added to wet concrete or mortar. The product conforms to IS: 2645-1975 as an 'Integral waterproofing Admixture'. It fills up the capillaries in the concrete giving effective waterproofing.

AREAS OF APPLICATION :
It is used for waterproofing of concrete and sand-cement mortar used in basements, roof slabs and screeds, water retaining structures, external plastering, bathrooms and balconies, water tanks, sumps and drains, etc.

FEATURES & BENEFITS :
Being a liquid, dispersible in concrete / mortar mixes
Makes the concrete / mortar more cohesive
Increases durability, by increase in impermeability
Economical in application
Does not affect the setting time and strength
Reduces shrinkage cracks in plaster & concrete

METHOD OF APPLICATION :
Add 200 Gms of PAR Plast - LW for every 50 kg cement in the concrete/ mortar mix The recommended dose of PAR Plast - LW is mixed into the gauging water, required to prepare concrete / mortar. The concrete or mortar should be mixed for 2-3 minutes to thoroughly disperse. Cure the applied mortar or concrete as per good construction practices

PRECAUTIONS & LIMITATIONS :
Do not add PAR Plast - LW directly to cement
Maintain water-cement ratio as low as possible
Do not increase the recommended dose of PAR Plast - LW

TECHNICAL INFORMATION :
Specific gravity : 1.08 ± 0.03

PACKING :
1Kg, 5 Kg,10 Kg, 20 Kg, 60 Kg & 230Kg.

PARPLAST, a specially formulated polymeric plasticizer improves the workability of cement mortar reducing water requirement at the same time.

APPLICATIONS
• In external plaster to walls of buildings.
• In toilet sunk portion filling mortar.
• In all thin RCC walls, domes and shells.

ADVANTAGES
• Reduces water/cement ratio while maintaining good workability.
• Improves waterproofing of the surface.
• Highly cost effective,
• Improves strength of plaster and reduces shrinkage cracks.
• Improves rebound losses in plaster and segregation in concrete.

CHARACTERISTICS
State : Liquid
Colour : Brown

GUIDELINES FOR USE
Dosage of 100 ml of PARPLAST per 50 kg bag of cement is recommended.

• Take 100 ml of PARPLAST and mix with 5 liters of water.
• Add the solution to cement mortar made from 50 kg of cement.
• Mix thoroughly and ensure the solution is spread over the entire mortar.
• Add water to achieve the required consistency. (Note : Due care should be taken as quantity of water required, will be about 30% less than the normal when PARPLAST is used.)
• Mix thoroughly and apply in normal fashion.

STORAGE : Stable under normal conditions. Should be stored away from direct sunlight.

HANDLING : Use of gloves and safety glasses is recommended.

PACKING : 1 kg, 5 kg, 10 kg, 20 kg, 60 Kg and 230 kg

PARPROOF, a specially formulated product helps in making the concrete waterproof and can be used as intergral waterproofing product for brick bat coba.

APPLICATIONS
• Final slab.
• Coating of terrace with cement.
• Integral waterproofing agent for brick-bat-coba.
• Repair of water tanks.

ADVANTAGES
• Makes the concrete waterproof.
• Helps makes cementacious mix waterproof
• Highly cost effective

CHARACTERISTICS
State : Liquid
Colour : Brown
Specific Gravity : 1.20
pH : 10.00

GUIDELINES FOR USE
Dosage of 100 - 200 ml of PARPROOF per 50 kg bag of cement is recommended.
1. Add 50% of the water required.
2. Add required quantity of PARPROOF.
3. Mix thoroughly and ensure PARPROOF is spread over the entire mortar.
4. Add water to achieve the required consistency.
5. Mix thoroughly and apply in normal fashion.

STORAGE :
Stable under normal conditions. Should be stored away from direct sunlight.

HANDLING :
Use of gloves and safety glasses is recommended.

PACKING :
Available in 5 kg, 10 kg, 20 kg, 60 kg and 250 kg