PAR PLAST SC 240
High Range Water reducing admixture for concrete PAR PLAST SC 240 is a superplasticising admixture to produce pumpable or flowable concrete with a low w/c ratio. When added to the concrete mix it gives a high slump without any bleeding or segregation in the fresh state and high early and ultimate strengths inthe hardened state.

SPECIFICATION :
Meets the requirement of IS:9103-1999 and ASTM-C-494-86, Type A

AREA OF APPLICATION:
• Concrete for columns, beams, decks & dams
• General purpose ready mix concrete prestessed & precast concrete
• Complex & heavily reinforced concrete Railway sleepers
• High strength & low permeable concrete
• Mass concrete

FEATURES & BENEFITS:
• Reduces water upto 15% without effecting the workability
• Increases workability at a given w/c ratio, easy compaction, eliminates honeycombing
• Provides highly cohesive concrete mix & reduces the chance of bleeding & segregation
• Makes concrete less permeable and hence more durable
• No chloride - suitable for RCC
• Compatible with all types of Portland cement/including slag/SRC
• Helps in reducing cement content for a required strength
• High early and ultimate compressive strength concrete

METHOD OF APPLICATION:
The correct quantity of PAR PLAST SC 240 should be measured with recommended dispenser and should be thoroughly dispersed with approx. 5 - 10% of the recommended water content (based on mix design by weight.) Mix concrete constituents along with balance approx. 90 - 95 % of the recommended water content (based on mix design by weight) for 3 minutes. As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for 2-3 minutes to get a homogeneous mix.

TECHNICAL INFORMATION :
Colour : Dark Brown
Base : Sulfonated Napthalene Formaldehyde
Sp. Gravity : 1.16 - 0.04 at 30oC
Chloride Content : NIL
Dose : 200 ml to 1000 ml per 50 kg bag of cement (depending upon site requirements)

PACKING:
20 Kg ,60 Kg & 250 Kg

PAR PLAST SPL
Water reducing & retrading admixture for concrete PAR PLAST SPL is a highly effective, water reducing liquid admixture with no added chlorides. It provides a significant improvement in workability without any bleeding & segregation.

SPECIFICATION :
Meets the requirement of IS:9103 - 1999 and ASTMC- 494-86, Type B & D.

AREA OF APPLICATION:
• Concrete block and mortar
• Precast and reinforced concrete
• Brick laying mortar mixes
• Tremie concrete for moderate pours

FEATURES & BENEFITS:
• Reduces water upto 20 %
• Improves workability at a given w/c ratio
• Provides highly cohesive concrete mix without any bleeding and segregation
• Helps in reducing cement content for a required strength

METHOD OF APPLICATION:
The correct quantity of PAR PLAST SPL should be measured with recommended dispenser and should be thoroughly dispersed with approx. 5 - 10 % of the recommended water content (based on mix design by weight.)Mix concrete constituents along with balance approx. 90 - 95 % of the recommended water content (based on mix design by weight) for 3 minutes. As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for2-3 minutes to get a homogeneous mix.

TECHNICAL INFORMATION :
Colour: Dark Brown
Sp. Gravity: 1.19 ± 0.04 at 30OC
Chloride Content: Nil
Base : Sulfonated Napthalene Formaldehyde
Dose: Upto 750 ml/ 50 kg bag of cement

PACKING: 20 Kg ,60 Kg & 250 Kg

PAR PLAST CS 225
Water Reducing & Retarding Admixture for concrete PAR PLAST CS 225 is a plasticizing & retarding admixture for concrete which provides a plastic and cohesive concrete mix with increased durability and reduced shrinkage in the hardened state. It provides excellent retention of slump with economical dosages.

SPECIFICATION :
Meets the requirement of IS:9103 - 1999 and ASTM-C-494-86, Type F & G

AREA OF APPLICATION:
• Concreting in high temperature conditions
• Large pours to prevent cold joints
• General purpose ready mix concrete
• Architectural concrete, pile concrete, prestessed concrete
• Highway concrete, bridge deck concreting

FEATURES & BENEFITS:
• Retarding plasticizer that reduces water upto 25%
• Improves workable time by controlled retardation
• Improves compaction due to increased workability, without bleeding and segregation
• Reduces shrinkage
• Lowers permeability
• High ultimate strength without increasing cement content
• Non staining
• Compatible with all types of Portland cement/including slag/SRC
• Chloride free

METHOD OF APPLICATION:
The correct quantity of PAR PLAST CS 225 should be measured with recommended dispenser and should be thoroughly dispersed with approx. 5 - 10 % of the recommended water content (based on mix design by weight.) Mix concrete constituents along with balance approx. 90 - 95 % of the recommended water content (based on mix design by weight) for 3 minutes.As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for2-3 minutes to get a homogeneous mix.

TECHNICAL INFORMATION :
Colour : Dark Brown
Base : Modified Sodium Naphthalene.
Sp. Gravity : 1.22 ± 0.04 at 30oC.
Dose : upto 750 ml per 50 kg bag cement (depending upon site requirements)
Chloride content : Nil

PACKING:
20 Kg,60 Kg & 250 Kg

PARPLAST-SC 299, a specially formulated polymeric super plasticizer improves the work ability of concrete reducing water requirement and is suitable for even higher grades(>M 50) of concrete.

APPLICATIONS
Specially formulated for site mix concrete.
In all concrete work such as basement walls, underground and overhead tanks.
In all RCC walls, pillars etc.

ADVANTAGES
Reduces water/cement ratio while maintaining same slump.
Highly cost effective,
Improves strength of concrete and reduces shrinkage cracks.

CHARACTERISTICS
State : Liquid
Colour : Brown

GUIDELINES FOR USE
Dosage of 300 - 600 ml. of PARPLAST-SC 299 per 50 kg bag of cement is recommended. It helps in reduction of water – cement ratio for the same slump.

STORAGE : Stable under normal conditions. Should be stored away from direct sunlight.

HANDLING : Use of gloves and safety glasses is recommended.

PACKING : 250 kg drums.