PAR SHUTTER RELEASE :MRA
Shuttering Oil / Concrete Form Release Agent

Description
PAR SHUTTER RELEASE :MRA is shuttering oil / concrete form release agent that provides quick, easy and clean release of concrete from forms. It provides a smooth, flat surface, free of voids and defects. It will not transfer from forms and it leaves concrete surfaces unstained, ready for re-use almost instantly.

Characteristics
• Physical Appearance Yellowish low viscous liquid
• Coverage 1 Ltr will cover approximately 20 to 36 m2 of forms
• depending upon application method and substrate.
• Specific Gravity 0.83 + 0.04

AREA OF APPLICATION:
• Can be applied on metal, wood, plastic and fiberglass forms.
• Precast moulds & plywood.
• Equipment maintenance-scoots, buckets hoist and paving machines.

FEATURES & BENEFITS:
• Acts as bond breaker and form cleaner.
• Eliminates voids, defects, build-up of concrete and mortar & provides fair finished exposed concrete.
• Non-staining will not wash off.
• Protects steel forms from rusting.
• Cuts clean-up time.
• Economical & easy to use.
• Protects plywood forms from bulging due to water absorption, thus increases the number of reuses.
• Stripping of forms / de-shuttering becomes easy without hooking, thus increases shutter's life.

METHOD OF APPLICATION:
• Remove dust, flakes, or other foreign particles by jet or dry air and clean the surface mechanically or with wire brush to ensure removal of loose rust particles.
• No pre-mixing is required before application. The product may be used directly from the container.
• Apply brush, roller or pump-up type sprayer. Coated forms may be used ½ hour after application of PAR SHUTTER RELEASE -MRA.

Packing:
Available in 20 Ltr and 200 Ltr drum.