PARPLAST-RC 230, a specially formulated organic plasticizer improves the workability of concrete, reducing water requirement and making the concrete stronger. It retards the setting of concrete so that transportation of RMC is not a problem.

APPLICATIONS
• Specially formulated for RMC.
• Delays cement hydration process and retains slump, thereby helping in transportation of concrete.
• In all concrete work such as basement walls, underground and overhead tanks.
• In all RCC walls, pillars etc.

ADVANTAGES
• Reduces water/cement ratio while maintaining same slump.
• Highly cost effective,
• Improves strength of concrete and reduces shrinkage cracks.

CHARACTERISTICS
State : Liquid
Colour : Brown

GUIDELINES FOR USE
Dosage of 300 - 700 ml. of PARPLAST-RC 230 per 50 kg bag of cement is recommended. It helps in reduction of water – cement ratio for the same slump. The required quantity of PARPLAST-RC 230 is added to the concrete mix along with the water.

The optimal dosage is determined by site trials.

STORAGE :
Stable under normal conditions. Should be stored away from direct sunlight.

HANDLING :
Use of gloves and safety glasses is recommended.

PACKING :
Available in 250 kg drums.

Water Reducing Admixture for Concrete
PARPLAST-RCS 210, a specially formulated, naphthalene sulfonate based organic plasticizer improves the workability of concrete reducing water requirement and making the concrete stronger. It is specially formulated so that good workability is attained even when 100% crushed sand is used. It retards the setting of concrete so that transportation of RMC is not a problem.

APPLICATIONS
• Specially formulated for RMC.
• Delays cement hydration process and retains slump, thereby helping in transportation of concrete.
• Specially developed to provide workability with crushed sand.
• For all concrete work such as basement walls, underground and overhead tanks.
• For all RCC walls, pillars etc.

ADVANTAGES
• Reduces water/cement ratio while maintaining same slump.
• Highly cost effective,
• Improves strength of concrete.
• Reduces honey-combing.

CHARACTERISTICS
State : Liquid
Colour : Brown
Sp. Gravity : 1.18
pH : 7.5

GUIDELINES FOR USE
For concrete, dosage of 200 - 500 ml. of PARPLAST-RCS 210 per 50 kg bag of cement is recommended. Mix sand, cement and mettle. To this mix, add about 50% of water required. Add PARPLAST-RCS 210 and then remaining water to achieve the desired slump.

PACKING :
Available in 250 kg drums.

PARPLAST-RC 275, a specially formulated organic plasticizer improves the workability of concrete, reducing water requirement and making the concrete stronger. It retards the setting of concrete so that transportation of RMC is not a problem.

APPLICATIONS
Specially formulated for RMC.
Delays cement hydration process and retains slump, thereby helping in transportation of concrete.
In all concrete work such as basement walls, underground and overhead tanks.
In all RCC walls, pillars etc.

ADVANTAGES
Reduces water/cement ratio while maintaining same slump.
Highly cost effective,
Improves strength of concrete and reduces shrinkage cracks.

CHARACTERISTICS
State : Liquid
Colour : Brown
Sp Gravity : 1.20
pH : 7.5

GUIDELINES FOR USE
Dosage of 300 - 700 ml. of PARPLAST-RC 275 per 50 kg bag of cement is recommended. It helps in reduction of water – cement ratio for the same slump. The required quantity of PARPLAST-RC 275 is added to the concrete mix along with the water. The optimal dosage is determined by site trials.

STORAGE :
Stable under normal conditions. Should be stored away from direct sunlight.

HANDLING :
Use of gloves and safety glasses is recommended.

PACKING :
Available in 250 kg drums

High Range Water Reducing Admixture for Concrete

PARPLAST-RNF, a specially formulated naphthalene sulfonate based organic plasticizer improves the work ability of concrete reducing water requirement and making the concrete stronger. It retards the setting of concrete so that transportation of RMC is not a problem.

APPLICATIONS
• Specially formulated for RMC.
• Delays cement hydration process and retains slump, thereby helping in transportation of concrete.
• For all concrete work such as basement walls, underground and overhead tanks.
• For all RCC walls, pillars etc.

ADVANTAGES
• Reduces water/cement ratio while maintaining same slump.
• Highly cost effective,
• Improves strength of concrete.
• Reduces honey-combing.

CHARACTERISTICS
State : Liquid
Colour : Brown
Sp. Gravity : 1.22
pH : 7.5

. GUIDELINES FOR USE
For concrete, dosage of 200 - 600 ml. of PARPLAS-RNF per 50 kg bag of cement is recommended. Mix sand, cement and mettle. To this mix, add about 70% of water required. Add PARPLAST-RNF and then remaining water to achieve the desired slump.

PACKING :
Available in 250 kg drums.

Polycarboxylic ether MID range water reducer-Economical

PAR-HYPLAST MD is a unique combination of the latest generation super plasticizers, based on polycarboxylic ether polymers with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs which is enhanced by stearic dispersion. This mechanism considerably reduces the water demand in flowable concrete.

PAR-HYPLAST MD combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high work ability.PARHYPLASTMDis a strong super plasticizer allowing production of consistent concrete properties around the required dosage.

APPLICATION:
• Ready mix concrete (RMC)
• On site mixing
• Building projects
• Bridges, dams and other infrastructure projects
• Flooring

ADVANTAGES:
• Increased retardation controls the heat of hydration and
• yields high ultimate strength
• Improved adhesion to reinforcing and prestressing steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Economical

PHYSICALAND CHEMICALPROPERTIES Appearance : Pale yellow to light brown low viscous liquid.
Viscosity : ≤500 cps
Specific gravity : 1.1 to 1.2

PACKING: 230kg HDPE drums, and in Tanker load.

SHELFLIFE: 1Year from the date of Mfg

Superplasticizer with high water reducing power
PAR-HYPLAST HRW is a unique combination of the latest generation super plasticisers, based on polycarboxylic ether polymers with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs which is enhanced by stearic dispersion. This mechanism considerably reduces the water demand in flowable concrete.
PAR-HYPLAST HRW combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability.

APPLICATION:
• Ready mix concrete (RMC)
• On site mixing
• Building projects
• Bridges, dams and other infrastructure projects
• Flooring

ADVANTAGES:
• Low viscosity suitable for pumping of different grades of • concrete to higher floors
• Self compacting properties
• Improved adhesion to reinforcing and prestressing steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability

PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Pale yellow to light brown low viscous liquid.
Viscosity : 500 cps
Specific gravity : 1.1 to 1.2

DOSAGE: 0.40% - 1.3%

PACKING: Available in 230kg HDP drums, and in Tanker load.
SHELF LIFE: 1Year from the date of Mfg

High range water reducer for high grade and high performance concrete.
PAR-HYPLAST ZEN, a specially formulated organic placticizer is based on blends of different types of polycarboxylic ether polymer for High Quality ready-mix concrete. It isused for high grade and high performance concrete. PAR-HYPLAST ZEN is free of chloride &low alkali. It is compatible with all types of cements and pozzolanic material.

APPLICATIONS
• Ready to use single component liquid.
• High range water reducer specially formulated for Ready mix concrete and for precast concrete.
• The plasticizing effect and water reduction are higher if the admixture is added to the damp concrete after 50 to 70% of the mixing water has been added.
• Recommended to use for M60 and above grade
• Dosage Limit 0.80% to 1.2% on total cementitous material.

ADVANTAGES
• Greatly reduces water/cement ratio. Maintains the work ability.
• Assists for performance characteristics, cost savings, environmental and social benefits.
• Improves compressive strength of concrete and maintains concrete Quality.
• Reduces honey-combing and improves the surface finish of concrete.

PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Pale yellow to light brown low viscous liquid.
Viscosity : ≤ 500 cps
Specific gravity : 1.1 to 1.2

PACKING :
Available in 230kg HDPE drums, and in Tanker load.

SHELF LIFE :
1Year from the date of Mfg

PAR-HYPLAST HPZ is a specially formulated organic plasticizer is based on blends of different types of polycarboxylic ether polymer.
The utilization of supplementary cementitiousmaterials is well accepted because of the several improvementspossible in the concrete composites, and due to the overalleconomy.

PAR-HYPLAST HPZ provides optimal workability and strengthwhen cement is replaced by ground granulated blast furnace slag (GGBS) and highvolume fly ash (HVFA) at the various levels.

APPLICATIONS
• Ideally suited for optimum percentage of replacement40-50%
• High rang water reducer, specially formulated for Ready mix concrete.
• For Low grade to higher standard grades of concrete.

ADVANTAGES
• Greatly reduces water/cement ratio. Maintains the workability.
• Assists for performance characteristics, cost savings, environmental and social benefits.
• Improves compressive strength of concrete and maintains concrete Quality.
• Reduces honey-combing and improves the surface finish of concrete.

PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Pale yellow to brownish low viscous liquid.
Viscosity : ≤ 500 cps
Specific gravity : 1.1 to 1.2

STRENGTH PROPERTIES
Compressive Strength of M40 grade Concrete with various percentages of GGBS and High volume Flyash replacement of Cement is as follows. Following are the tentative Lab trial results; dosage of PAR- HYPLAST HPZ 1 to 1.2% on total cementitous content.

PACKING: 230kg HDPE drums, and in Tanker load.